Installation guide

Driver Installation

Windows 98SE/ME/2000/XP

1. After installing the board boot up Windows.

2. At the new Add New Hardware Wizard, click

Cancel.

3. Insert the software CD, Autorun should start the

installation automatically. If Autorun does not

start, click Start, Run. Type X:\Auto.exe, then

click OK. (Replace X: with the drive letter of your

CD-ROM)

4. Click Install Xear 3D Driver, then follow the on

screen instructions to complete the installation.

Windows Server 2003

1. After installing the board boot up Windows.

2. At the Found New Hardware Wizard, insert the

software CD. Select Install the hardware

automatically (Recommended), then click Next.

3. Click Finish.

4. Click Start/Settings/Control Panel/Sounds and

Audio Devices.

5. Check Enable Windows Audio option, then

click OK. Click Yes to restart your system.

To Verify Succesfull Driver Installation

1. Go to Device Manager to verify successfull driver

installation.

Win98SE/ME: From the main desktop, right click

My Computer, click Properties, then click Device

Manager.