User`s manual

1-2
SoundWave 128 PCI User's Manual
1-1.1 Static Electricity Precaution
One of the routine precautions you must be aware of when
working with computer components is the problem of static
electricity discharge.
Note Leave the SoundWave 128 PCI in its
static-resistant bag until you are ready to in-
stall it.
Caution Static electricity discharge may perma-
nently damage your system. In order to avoid
possible static electricity discharge during instal-
lation procedures, please follow the guidelines
below:
• Discharge any static electricity build up in your
body by touching a large grounded metal sur-
face or the computer’s case (if plugged in), for
a few seconds.
• During installation procedures, avoid any con-
tact with internal parts. Handle cards only by
their edges.
1-1.2 Record the Serial Number
In order for SIIG's Technical Support or Return Merchan-
dise Authorization Department to give you prompt service,
you will need the following product information. The serial
number label is located on the side of the box and on the
back of the card.
S/N XXXXXXXXXXXX XX-XXXXXX
Please take a moment to record the serial number.
Serial Number: _____________________________
Part Number: _____________________________
Date purchased: _____________________________
Part No.Serial No.