User`s manual

Hardware Installation
2-5
5. To install the SoundWave 128 PCI, carefully align the
board’s bus connector with the selected slot. Push the
board down firmly, but gently, until it is well seated.
Note Hold the card by its external edges only.
Try to avoid touching the components, connectors
or pins.
Figure 2-3. Installing the SoundWave 128 PCI
6. Replace the slot bracket's holding screw to secure the
board to the rear slot panel.
7. Make all the internal device connections that you wish
to connect to the card before replacing the computer's
cover.
8. Replace the computer’s cover.
9. Reconnect power cord and cables.
You have completed the hardware installation.