User`s manual

SoundWave 128 PCI User's Manual
2-4
2-3 Installing the SoundWave 128 PCI Card
General instructions for installing the board are given since
the design of computer chassis varies. Refer to your
computer's reference manual for information on removing
the computer's cover.
1. Turn OFF the power to your computer and any other
connected peripheral devices.
2. Unplug the power cord from the back of the computer.
3. Remove the computer's cover by removing its mounting
screws and sliding off the cover.
4. Select an available PCI slot, remove the selected slot
bracket by unscrewing the holding screw and sliding it
out. Save this screw for securing the card after it’s
installed.
Figure 2-2. Remove the Slot Bracket