User`s manual

Hardware Installation

2-3

CD Audio Input (J10 & J11)

Stereo connectors which can be used to attach CD-ROM

audio cable. Select one of these two connectors to match with

the type of audio cable which comes with your CD-ROM

drive for audio-in connection.

2-2.1 JP1: Audio Output Jumper Setting

Audio Jumper Setting

SPEAKER OUT

Audio output with power

amplifier

LINE OUT

Audio output without

power amplifier (Default)

Note The SoundWave 128 PCI has a built-in power amplifier.

This feature is turned off by default. If your speakers do not

have built-in power amplifier, you may turn on the on-board

amplifier by resetting the jumper JP1. Do not connect

speakers with built-in power amplifier when the on-board

power amplifier is on.