Installation guide

6
Windows ME
For New Windows ME Installation
1. Install the board and follow Microsoft procedures to
install Windows ME accordingly.
2. Once Windows has been installed, right click My
Computer, then click Properties. Select Device
Manager tab.
3. Double click PCI Controller listed under Other
Devices.
4. Select Driver tab, then click Update Driver button.
5. Insert the driver diskette, select Automatic search
for a better driver (Recommended), then click Next.
6. Click Finish, remove the driver diskette and restart
Windows to complete the driver installation.
For Existing Windows ME Installation
1. Install the board and boot up Windows ME.
2. At the Add New Hardware Wizard, insert the driver
diskette.
3. Select Automatic search for a better driver
(Recommended), then click Next.
4. Click Finish.
5. Remove the driver diskette and restart Windows to
complete the driver installation.