User`s manual

RAID
2-13
2-4 Deleting RAID Arrays
1. As the BIOS boots press F3 when prompted to enter the
UltraATA 100 RAID BIOS utility.
2. Press F1 to dissolve a RAID set.
3. Enter the number of the RAID set to be deleted.
4. Answer Y to remove the RAID set.
5. Press ESC when finished to reboot.
2-5 Using RAID Auto Setup
Each RAID array setup option comes with an Auto configuration
feature. Use Auto Setup option with new or blank hard drives.
2-5.1 RAID 0 (Striping)
1. At boot press F3 when prompted to enter the RAID
BIOS utility.
2. Press F2 to create a RAID set.
3. Press F1 to create a Stripe set.
4. Press A for Auto Setup.
5. Enter the total number of drives in the stripe set.
6. Press Y to accept the configuration.
7. Configure another RAID set or press ESC to reboot.
2-5.2 RAID 1 (Mirroring)
1. At boot press F3 when prompted to enter the RAID
BIOS utility.
2. Press F2 to create a RAID set.
3. Press F2 to create a Mirror set.
4. Press Y to use Auto setup.
5. Press Y to accept the configuration.
6. Configure another RAID set or press ESC to reboot.
2-5.3 RAID 0+1 (Mirror-striping)
1. At boot press F3 when prompted to enter the RAID
BIOS utility.