User`s manual

User's Manual
2-6
10. Enter Y to create the Striped set. The following screen appears:
Drive Number: 0 Manufacturer Model 19541 MB
Drive Number: 1 Manufacturer Model 19541 MB
Secondary Channel:
Drive Number: 2 Manufacturer Model 19541 MB
Drive Number: 3 Manufacturer Model 19541 MB
Set: 1 <0,2> CMD Striped set <PM> 19081 MB
Set: 2 <1> Manufacturer Model <PS> 19541 MB
Set: 3 <3> Manufacturer Model <SS> 19541 MB
Press F1 to delete RAID set
Press F2 to create RAID set
Press F3 to create spare drive
Press F4 to resolve conflicts
Press <ESC> to exit RAID configuration utility
Creating Mirrored Sets (RAID 1):
1. To create a Mirrored RAID set, at the opening screen press F2.
The following screen appears:
Press F1 to create Striped set
Press F2 to create Mirrored set
Press F3 to create Mirrored-Striped set
Press <ESC> to exit
Your selection?
2. A Mirrored set uses 2 disk drives. To create a Mirrored set, press
F2. The following line appears:
Set up Mirrored set
Do you want automatic set up (No copy operation)? (Y/N)
3. If you want the Mirrored set created automatically
(recommended), press Y and follow directions. If you wish to
enter each drive and all pertinent information, press N, and the
following line appears:
Enter the first drive number (source drive) in Mirrored set: