Installation guide

Software Installation

Mac OS X (v10.2.x or later) drivers are built into the

controllers's firmware, no additional driver installation

or firmware update are needed. Go to Mac OS X

Installation on page 5 to complete the installation.

In order for the Serial ATA 4-Channel PCI-M to work in

Mac OS X v10.1.x the firmware must be updated using

the utility on the driver CD. Go to Mac OS X (10.1.x

Firmware Update below.

Mac OS X (v10.1.x) Firmware Update

Before installing the update please follow these

guidelines:

• Make sure no drives are connected to the Serial ATA

4-Channel PCI-M

• This utility can only be used in Mac OS X v10.1.x

• Close all applications before updating the firmware

• You must have administrator privilages to install

this update

1. Insert the included software CD. Double click the

Drivers icon that appears on the desktop.

2. Copy SIIG3114101UpDriveR1.sit onto the desktop,

then double click it.

3. Double click SIIG3114101UpDriveR1 Folder that

appears on the desktop.

4. Launch the utility by double clicking the file

Update.command.

5. Press C and the Return key to continue. Otherwise

press Q and the Return key to quit.

6. Wait about 30 seconds, when finished press Quit

then shutdown your system.