User Manual

Existing Server 2012 Installation

1. Install the board and boot up Windows.

2. Insert the driver CD. Close the AutoPlay box if

prompted.

3. Click Windows key. Right click Computer,

Properties, Device Manager.

4. Right click Serial ATA Controller under Other

devices, click Update Driver Software.

5. Click Browse my computer for driver software.

6. Type D:\Win7\64bit\AMD64, click Next. (Change

D: to match your CD/DVD-ROM drive letter)

7. Click Close.

Windows Vista (32-/64-bit) / Server 2008 (32-/64-

bit)

New Windows Vista (32-/64-bit) / Server 2008 (32-/64-bit)

Installation

If you don't have two CD-ROM players, copy the contents

of Floppy folder in the driver CD to your Flash Drive for

32-bit system; copy the contents of 64bit folder for 64-bit

system. Then follow the directions below:

1. Install the board and follow Microsoft procedures

to install Windows accordingly.

2. At Install Windows or Windows Setup, click Next,

then click Install now.

3. Click Browse.

4. For 32-bit: Double click folder Floppy located on the

driver CD or your Flash Drive, then click OK.

For 64-bit: Double click folder 64bit located on the

driver CD or your Flash Drive, select AMD64, then

click OK.