User Manual

Windows 7 (32-/64-bit) / Server 2008 R2

New Windows 7 (32-/64-bit) / Server 2008 R2 Installation

If you don't have two CD-ROM players, copy the contents

of Win7 folder in the driver CD to your Flash Drive, then

follow the directions below:

1. Install the board and follow Microsoft procedures

to install Windows accordingly.

2. At Install Windows or Windows Setup, click Next,

then click Install now.

3. Click Browse.

4. Double click folder Win7 located on the driver CD

or your Flash Drive.

For Window 7 32-bit: Click 32bit, then click OK.

For Windows 7 64-bit / Server 2008 R2: Double click

64bit, click AMD64, then click OK.

5. Select Silicon Image SiI 3132...Controller, then click

Next.

6. Check I accept the license terms, click Next.

7. Select Custom...(advanced), then click Next.

8. Click OK to continue. Skip this step if not prompted.

9. Wait several seconds, then follow the on-screen

instructions to complete Windows installation.

Existing Windows 7 (32-/64-bit) / Server 2008 R2

Installation

1. Install the board and boot up Windows.

2. Insert the driver CD. Close the AutoPlay box if

prompted.

3. Right click Computer, Manage, Device Manager.

4. Right click Serial ATA Controller under Other

devices, click Update Driver Software.