User Manual

5
4. Double click folder Win8 located on the driver CD
or your Flash Drive.
For 32-bit: Click 32bit, then click OK.
For 64-bit: Double click 64bit, click AMD64, then
click OK.
5. Select Silicon Image SiI 3132...Controller, then click
Next.
6. Check I accept the license terms, click Next.
7. Select Custom...(advanced), then click Next.
8. Click OK to continue. Skip this step if not prompted.
9. Wait several seconds, then follow the on-screen
instructions to complete Windows installation.
Existing Windows 8 (32-/64-bit) Installation
1. Install the board and boot up Windows.
2. Insert the driver CD. Close the AutoPlay box if
prompted.
3. Right click Computer, Manage, Device Manager.
4. Right click Serial ATA Controller under Other
devices, click Update Driver Software.
5. Click Browse my computer for driver software.
6. For 32-bit: Type D:\Win8\32bit
For 64-bit: Type D:\Win8\64bit\AMD64
(Change D: to match your CD/DVD-ROM drive
letter)
7. Click Next, and click Close.