User Manual

Figure 3. Connecting SATA data cable

5. Follow the same instructions when connecting a

second hard disk drive.

6. Device connection is now complete. Replace the

computer cover and reconnect the power cord.

Driver Installation

This section provides information for how to install the

DP SATA II PCIe drivers.

Windows 8 (32-/64-bit)

New Windows 8 (32-/64-bit) Installation

If you don't have two CD-ROM drives, copy the contents

of Win8 folder in the driver CD to your Flash Drive, then

follow the directions below.

1. Install the board and follow Microsoft procedures

to install Windows accordingly.

2. At Install Windows or Windows Setup, click Next,

then click Install now.

3. Click Browse.

4. Attach the other end of the SATA data cable to the

Serial ATA connector on the DP SATA II PCIe.