Installation guide

For An Existing Installation

1. Setup the RAID array prior to driver installation and

boot up to Windows.

2. At the Found New Hardware Wizard,

XP (w/SP1 or earlier)/Server 2003: continue to step #3

XP (w/SP2 or later)/Server 2003 (w/ SP1 or later): select

No, not at this time, then click Next.

3. Insert the driver CD, select Install the software

automatically (Recommended), and click Next.

4. Accept the default entry, then click Next.

5. Click Finish, then restart to complete the installation.

When Windows resumes, go to SATARaid GUI on page

15 and install the RAID monitoring utility.

To Verify Windows 2000/XP/Server 2003

Installation

1. Right click My Computer, click Manage, click

Device Manager.

2. Double click SCSI and RAID controllers, then

double click Silicon Image Sil 3512 SATARaid

Controller to display driver properties. A message

This device is working properly is displayed in the

dialog box, the driver has been correctly installed.