Installation guide

6
Inserting/Removing ExpressCard
PCI Express-based ExpressCard Devices
PCI Express-based ExpressCard devices are not
hot-plug/hot-swap compatible through this adapter.
Insert a PCI Express-based ExpressCard before startup
or restart the computer after inserting the card.
• To insert, position the ExpressCard on the left
hand side of the ExpressCard slot, then gently
slide the ExpressCard into the slot until the locking
mechanism clicks then release pressure.
• To remove the ExpressCard, gently press in on the
ExpressCard to unlock, then pull it out.
USB-based ExpressCard Devices
USB-based ExpressCard devices are hot-plug/hot-swap
compatible.
• To insert, position the ExpressCard on the left
hand side of the ExpressCard slot, then gently
slide the ExpressCard into the slot until the locking
mechanism clicks then release pressure.
• To remove the ExpressCard, gently press in on the
ExpressCard to unlock, then pull it out.