Installation guide

5
Driver Installation
Windows 7 (32-/64-bit)
1. Install the board, then boot up Windows.
2. At the Windows desktop insert the driver CD.
3. At the CD AutoPlay box, click Open folder to view
files.
4. Double click Setup.exe (Application).
5. Follow the on screen instructions to complete the
installation.
Windows Vista (32-/64-bit)
1. Install the board, boot up Windows.
2. At Found New Hardware, click Cancel.
3. Insert the driver CD:
At the Auto Play window: click Open folder to
view files. Double click Setup.exe (Application).
If Auto Play doesn't start: click Start, in the Start
Search box, type D:\setup.exe, press Enter.
(Change D: to match your CD/DVD-ROM drive
letter)
4. Follow the on screen instructions to complete the
installation.
Windows XP (32-/64-bit)
1. Install the board, boot up Windows.
2. At the Found New Hardware Wizard, click Cancel.
3. Click Start, Run, type D:\Setup.exe, then click
OK. (Change D: to match your CD/DVD-ROM
drive letter)
4. Follow the on screen instructions to complete the
installation.