Installation guide

Using the USB 3.0 to eSATA 6Gb/s

Adapter Cable on Mac systems

Accessing eSATA Storage Device

An additional drive icon will appear on your desktop when

the USB 3.0 to eSATA 6Gb/s Adapter Cable is plugged into

a USB port. The drive acts just like a conventional hard

drive in your system.

Disconnecting the USB 3.0 to eSATA 6Gb/s

Adapter Cable

Not following these instructions may result in data

corruption, data loss or damage to your eSATA storage

device. Follow the steps below for your Mac system.

1. Verify the LED is not flashing before proceeding.

2. Drag the drive icon into the Trashcan icon and wait

for the confirmation message.

3. You can now unplug the USB 3.0 to eSATA 6Gb/s

Adapter Cable from the computer.