Installation guide

3
Hardware Installation
Static Electricity Discharge may permanently damage your
system. Discharge any static electricity build up in your
body by touching your computer case for a few seconds.
Avoid any contact with internal parts and handle cards
only by their external edges.
1. Connect the USB 3.0 to eSATA 6Gb/s Adapter Cable
to a USB port (USB 3.0 recommended) of your
system.
2. Connect your eSATA storage device to the eSATA
connector of the USB 3.0 to eSATA 6Gb/s Adapter
Cable
3. Power on your eSATA storage device.
Driver Installation
Both Windows and Mac will detect and install the correct
drivers for the USB 3.0 to eSATA 6Gb/s Adapter Cable
automatically. No additional driver installation is needed.
Note: In order to get SuperSpeed USB 3.0
performance, make sure your USB 3.0 controller
has the correct drivers installed.