Installation guide

ManualsBrandsSIIG Manualscomputer componentsJU-SA0012-S1

USB 2.0 to SATA/IDE

Quick Installation Guide

04-0477B

Introducing the USB 2.0 to SATA/IDE

The USB 2.0 to SATA/IDE allows you to connect a

barebone SATA/IDE disk drive through a USB port.

Features and Benefits

• Fully compliant with USB 2.0 & USB 1.1

• Transfer Rate: High-Speed up to 480 Mbps data

transfer rate

• Access any 2.5” or 3.5” SATA or 2.5” or 3.5” IDE

drive through USB 2.0 port

• Compatible with any IDE or SATA drive of any

brand or size

• Supports Ultra DMA 0-6 and Multi-word DMA 0-2

System Requirements

• Desktop or notebook PC computer with an available

USB 2.0 port

• Windows 7 (32-/64-bit) / Vista (32-/64-bit) / XP

(32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000

Summary of content (8 pages)

PAGE 1
USB 2.0 to SATA/IDE Quick Installation Guide Introducing the USB 2.0 to SATA/IDE The USB 2.0 to SATA/IDE allows you to connect a barebone SATA/IDE disk drive through a USB port. Features and Benefits • • • • • Fully compliant with USB 2.0 & USB 1.1 Transfer Rate: High-Speed up to 480 Mbps data transfer rate Access any 2.5” or 3.5” SATA or 2.5” or 3.5” IDE drive through USB 2.
PAGE 2
Package Contents • • • • • • • USB 2.0 to SATA/IDE adapter Power adapter with molex cable Power cord Serial ATA data cable 4-pin white molex to black Serial ATA power adapter Mini USB cable Quick installation guide Board Layout 40-pin IDE connector for IDE 3.5" HDD SATA connector Mini USB port Power/HDD Activity LED Power adapter jack 44-pin IDE connector for 2.5" IDE HDD Figure 1: Layout Hardware Installation Static Electricity Discharge may permanently damage your system.
PAGE 3
2.5" IDE Hard Disk 44-pin IDE connector is protected against polarity and should be easily connected to the device. If not, check if your connection points are appropriately aligned. 1. 2. 3. Connect the 44-pin IDE connector of the adapter to the 2.5" HDD. Attach the provided power supply to your 2.5" HDD. Plug the adapter into the USB port of your PC via the mini USB cable. Figure 2: Connecting 2.5" IDE HDD 3.
PAGE 4
3. Plug the adapter into the USB port of your PC via the mini USB cable. Figure 3: Connecting 3.5 IDE HDD 2.5"/3.5" SATA Drive 1. 2. 3. Connect SATA to device. Attach the provided power supply to your SATA drive. Plug the adapter into the USB port of your PC via the mini USB cable.
PAGE 5
Windows Driver Installation No driver installation needed. To Verify Windows Installation 1. Check Device Manger to verify installation. For Windows 7: Right click Computer, click Manage, then click Device Manager. For Windows Vista: Right click Computer, click Manage, click Continue, click Device Manager. For XP / Server 2003 / 2000: Right click My Computer, click Manage, then click Device Manager. For Server 2008: Right click My Computer, click Manage, double click Diagnostics, then click Device Manager.
PAGE 6
Blank Page 6
PAGE 7
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a 5-year manufacturer warranty with this product. Please see our web site for more warranty details.
PAGE 8
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.