Installation guide

ManualsBrandsSIIG Manualscomputer componentsJU-H62B22

Introducing the USB 2.0+1394 6-Port Bay Hub

The USB 2.0+1394 6-Port Bay Hub is designed to support

USB 2.0 and 1394 equipped PC computers. This USB

2.0+1394 combo hub expands USB and 1394 connectivity

to your computer.

Features and Benefits

• Unique drive bay design adds ports to the front of

your computer for convenient device connection

• Fits into either 3.5" or 5.25" (with included mounting

rack) drive bay

USB 2.0 Interface

• Compliant with USB specification rev. 2.0

• Provides 4 downstream ports for USB device

connections

• Supports high-speed (480Mbps), full-speed

(12Mbps), and low-speed (1.5Mbps) data transfer

modes

• Per port over-current detection and protection

• Supports simultaneous operation of multiple high-

speed USB 2.0 and USB 1.1 devices

• Hot-swapping feature allows you to attach/detach

USB devices without first powering your computer

off

04-0246C

USB 2.0

1394 Bay Hub

Quick Installation Guide

Summary of content (12 pages)

PAGE 1
USB 2.0 + 1394 Bay Hub Quick Installation Guide Introducing the USB 2.0+1394 6-Port Bay Hub The USB 2.0+1394 6-Port Bay Hub is designed to support USB 2.0 and 1394 equipped PC computers. This USB 2.0+1394 combo hub expands USB and 1394 connectivity to your computer. Features and Benefits • • Unique drive bay design adds ports to the front of your computer for convenient device connection Fits into either 3.5" or 5.25" (with included mounting rack) drive bay USB 2.
PAGE 2
• Works with various types of USB devices including hubs, PC video cameras, printers, scanners, CDR/Ws, DVD-ROMs, CF/SM/SD/MMC/Memory Stick memory card readers, removable drives, digital cameras, and more Note: USB 1.1 devices are limited to USB 1.1 speeds even when they are connected to a USB 2.0 host adapter or USB 2.0 hub. IEEE 1394 Interface • • • • • IEEE 1394-1995, P1394a (rev. 1.1) and OHCI Interface specification 1.
PAGE 3
Package Contents • • • • • • • • USB 2.0+1394 6-Port Bay Hub 5.25 inch mounting rack 1394 cable holding bracket (w/rubber holding ring) 6-pin to 6-pin 1394 cable USB 2.0 cable "Y" split power cable Bag assorted mounting screws Quick installation guide Hub Layout Important: The bay hub is shown in white in this manual. However, it is available in either black or white depending on the model purchased. Power Connector USB Upstream Port 1394 (6-pin) Internal Port 1394 (4-pin) USB 2.
PAGE 4
5.25" Mounting Rack Assembly Important: Use the Mounting Rack Assembly only when installing the hub into a 5.25" drive bay. Figure 2. 5.25" Mounting Rack Assembly USB Cable Connectors Type A connector Type B connector Figure 3.
PAGE 5
Installing the USB 2.0+1394 Bay Hub Important: In order for the USB 2.0+1394 6-Port Bay Hub to work properly, the driver of your existing USB 2.0 host adapter and existing 1394 host adapter must be installed properly. Assuming your USB 2.0 and 1394 host adapters are correctly set up with the correct driver, the USB 2.0+1394 6-Port Bay Hub should automatically be detected and installed when connected. 1. 2. 3. 4. Turn OFF the power to your computer and all connected peripheral devices.
PAGE 6
5. Use the included "Y" split power cable and plug in the mini power connector (same type of power connector used for the floppy drive) to the USB 2.0+1394 6-Port Hub's power connector. Figure 4. Connecting the Power Cable 6. Connect the Type B connector of the USB cable into the USB upstream port (root port) of the USB 2.0+1394 6-Port Hub. Figure 5.
PAGE 7
. Connect one end of the 1394 cable into the 1394 internal port on the USB 2.0+1394 6-Port Bay Hub. Figure 6. Connecting the 1394 Cable 8. Carefully thread the cables through the drive bay opening then push the hub assembly into the drive bay. Align the hub's screw holes with the appropriate holes in the drive bay, then carefully attach the hub to the case using the included mounting screws. Be careful not to overtighten the mounting screws. Mounting Screw Figure 7.
PAGE 8
9. Connect the Type A connector of the USB cable to the internal USB 2.0 port in your system. USB 2.0 Port Figure 8. Connecting to internal USB port 10. Connect the 1394 cable into an available 1394 port on the 1394 host adapter, use the included 1394 cable holding bracket to route the 1394 cable from the USB 2.0+1394 6-Port Bay Hub to the outside 1394 port. Note: If there is an internal 1394 port on your 1394 host adapter, connect the cable to the internal port.
PAGE 9
11. Connect the power connector of the "Y" split power cable to the system power supply. 12. Replace the computer's cover and reconnect the power cord, then turn the system on. 13. When Windows boots up, the USB 2.0+1394 6-Port Bay Hub automatically gets detected and installed. The hub is now ready for device connection.
PAGE 10
Blank Page 10
PAGE 11
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a 5-year manufacturer warranty with this product. Please see our web site for more warranty details.
PAGE 12
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades. SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty.