Installation guide

ManualsBrandsSIIG Manualscomputer componentsJU-H60012-S2

04-0657C

Introduction

The USB 3.0 & 2.0 Hub Card Reader is designed to

provide 6 additional USB 3.0 & 2.0 ports and a

multi-port card reader that supports the latest

SD and Memory Stick memory cards.

Key Features and Benefits

• Provides 3 USB 3.0, 3 USB 2.0 ports and a

USB 2.0 multi-port SD/MS card reader

• Works with high-bandwidth SuperSpeed

USB 3.0 devices, such as external hard

disks, memory card readers, high resolution

webcams, camcorders, digital video

cameras, multi-channel audio and more

• Compliant with Universal Serial Bus 3.0

Specification

• Comes with 5V/4A adapter to support

power hungry USB devices (JU-H60111-

S2 only)

USB 3.0 & 2.0 Hub Card

Reader

Quick Installation Guide

Summary of content (12 pages)

PAGE 1
USB 3.0 & 2.0 Hub Card Reader Quick Installation Guide Introduction The USB 3.0 & 2.0 Hub Card Reader is designed to provide 6 additional USB 3.0 & 2.0 ports and a multi-port card reader that supports the latest SD and Memory Stick memory cards. Key Features and Benefits • • • • 04-0657C Provides 3 USB 3.0, 3 USB 2.0 ports and a USB 2.0 multi-port SD/MS card reader Works with high-bandwidth SuperSpeed USB 3.
PAGE 2
System Requirements • • Desktop or notebook PC with an available USB port (USB 3.0 recommended) Windows® 8 (32-/64-bit) / Windows 7 (32/64-bit) / Vista (32-/64-bit) / XP (32-/64bit) / Server 2008 & 2003 (32-/64-bit) / Server 2008 R2 Package Contents • • • • USB 3.0 & 2.0 Hub Card Reader USB 3.0 cable (Type A/B) Power adapter Quick installation guide Layout Power Micro SD / LED Micro SDHC MSHG / MS Pro USB 3.
PAGE 3
Power adapter jack Upstream port (Root port, Type-B) USB 2.0 downstream ports (Type-A) Figure 2: Rear Layout USB 3.0 Connectors Type-A connector Type-B connector Figure 3: USB 3.0 Connectors Installation Important: The USB 3.0 & 2.0 Hub Card Reader only works at USB 3.0 speed when connected to a USB 3.0 host controller. Otherwise it will work as a USB 2.0 or USB 1.1 hub when connected to USB 2.0 or USB 1.1 host controller, respectively.
PAGE 4
In order for the USB 3.0 & 2.0 Hub Card Reader to work as a USB 3.0 hub, the driver for your existing USB 3.0 host controller has to be properly installed. This hub will automatically be detected and installed when connected to the USB 3.0 port. 1. 2. 3. 4. 4 Connect the Type-B connector of the included USB 3.0 cable to the Upstream port (Root Port, Type-B) of the USB 3.0 & 2.0 Hub Card Reader. Connect the Switching power adapter into the Power jack of the USB 3.0 & 2.
PAGE 5
To Verify Successful Installation 1. 2. Check in Device Manager. For Windows 8 / Windows 7 / XP / Server 2008 R2 & 2003: Right click Computer or My Computer, click Manage, click Device Manager. For Windows Vista: Right click Computer, click Manage, Continue, and Device Manager. For Server 2008: Right click Computer, click Manage, double click Diagnostics, and click Device Manager. Double click Universal Serial Bus controllers. For Windows 8 When connected to a USB 3.
PAGE 6
For Windows 7 / Server 2008 R2 / Vista / XP / Server 2008 & 2003 When connected to a USB 3.0 host adapter: NEC Electronics USB Hub will be listed three times or Renesas Electronics USB 3.0 Hub will be listed one time and Renesas Electronics USB 2.0 Hub will be listed twice. When connected to a USB 2.0 host adapter: Generic USB Hub should be listed twice.
PAGE 7
Inserting Memory Cards MSHG / MS Pro: Insert memory card with the top facing up and the gold pins facing down. SD / SDHC / SDXC: Insert memory card with the top facing down and the gold pins facing up. Micro SD / Micro SDHC: Insert memory card with the top facing down and the gold pins facing up. Make sure you hear a click sound for proper connection. Accessing Memory Cards When the USB 3.0 & 2.0 Hub Card Reader is successfully installed, four Removable Disk icons appear in Computer or My Computer.
PAGE 8
Card Reader Drive Icon Utility SIIG offers an optional software utility that hides unnecesary drive icons and only displays and labels the drive icons of inserted memory cards. This handy utility is available on SIIG's website. Download Drive Icon Utility 1. Go to www.siig.com. 2. Click on the Support tab found along the top of the screen. 3. Click Downloads. Select Driver, in the search box, type in the part number JU-H60012-S2 or JU-H60111-S2, then click Search. 4.
PAGE 9
Removing Memory Cards Memory cards can be removed at any time. However, to prevent data loss, data corruption, or memory card failure, DO NOT remove memory cards while it is copying or transferring data. Unplugging the Hub Card Reader Please follow the steps below to safely remove the USB 3.0 & 2.0 Hub Card Reader from the computer. Windows Vista / XP / Server 2003 & 2008 1. 2. 3. Click the Safely Remove Hardware icon located in the taskbar by the system clock.
PAGE 10
Blank Page 10
PAGE 11
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond. SIIG offers a 5-year manufacturer warranty with this product.
PAGE 12
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.