Installation guide

7. Replace the slot bracket screw to secure the card.

8. Replace the computer cover and reconnect the power

cord.

Driver Installation

This section provides information on how to install the

CyberSerial Dual PCIe-Dual Bracket drivers.

Windows 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device

(recommended), and click Next.

3. Check Specify a location, uncheck the other boxes,

then click Next.

4. Insert the driver CD, type in D:\2K, then click OK.

(Change D: to match your CD-ROM drive letter)

5. Click Next and Finish.

6. Repeat steps 1-5 to complete the installation.

Windows XP/Server 2003 (32-/64-bit)

1. At the Found New Hardware Wizard, select No, not

this time, click Next.

2. Select Install from a list or specific location

(Advanced), then click Next.

3. Insert the driver CD, check Include this location in

the search, uncheck the other box.

For 32-bit: Type D:\XP-Later\32-bit, and click Next,

then click Finish. (Change D: to match your CD-

ROM drive letter)

For 64-bit: Type D:\XP-Later\64-bit, and click Next,

click Continue Anyway, then click Finish. (Change

D: to match your CD-ROM drive letter)