Installation guide

ManualsBrandsSIIG Manualscomputer componentsJJ-E10D11-S1

CyberSerial Dual PCIe

Quick Installation Guide

04-0570A

Introducing the CyberSerial Dual PCIe

The CyberSerial Dual PCIe-Dual Bracket high-speed serial

I/O card provides two additional 9-pin serial ports.

Features and Benefits

• Compliant with PCI Express Base Specification 1.0a

• PCI Express 1-lane (x1) serial I/O card works with

PCI Express slots with different lane width

• Installs into any available PCI Express slot and

provides two 9-pin RS232 serial ports

• 128-byte FIFO buffers dramatically increase data

transmit/receive speed and supports data rates up

to 920 Kbps

• Works as standard RS232 port or with 5V or 12V

power output for devices that require power

System Requirements

• PCI Express-enabled system with an available PCI

Express slot

• Windows

2000 / XP (32-/64-bit) / Server 2003 &

2008 (32-/64-bit) / Vista (32-/64-bit)

Package Contents

• CyberSerial Dual PCIe-Dual Bracket adapter

• Connector bracket with 9-pin serial port (for the 2nd

serial port)

• "Y" split power cable

• Driver CD & quick installation guide

Summary of content (8 pages)

PAGE 1
CyberSerial Dual PCIe Quick Installation Guide Introducing the CyberSerial Dual PCIe The CyberSerial Dual PCIe-Dual Bracket high-speed serial I/O card provides two additional 9-pin serial ports. Features and Benefits • • • • • Compliant with PCI Express Base Specification 1.
PAGE 2
Layout Power connector* J2 Connector bracket with 9-pin serial port for 2nd serial port Pin 1 J1 Serial port 1 Figure 1: Layout * Note: If the serial port requires power output, connect the system power source to board's power connector. However, most serial devices do not require additional power through the serial port. Refer to your serial device's manual for more information.
PAGE 3
Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer’s case for a few seconds. Avoid any contact with internal parts and handle cards only by their external edges. 1. 2. 3. 4. 5. 6.
PAGE 4
7. 8. Replace the slot bracket screw to secure the card. Replace the computer cover and reconnect the power cord. Driver Installation This section provides information on how to install the CyberSerial Dual PCIe-Dual Bracket drivers. Windows 2000 1. 2. 3. 4. 5. 6. At the Found New Hardware Wizard, click Next. Select Search for a suitable driver for my device (recommended), and click Next. Check Specify a location, uncheck the other boxes, then click Next.
PAGE 5
4. Repeat steps 1-3 one or two times to complete the installation. Windows Vista™ (32-/64-bit) 1. 2. 3. 4. 5. At the Found New Hardware window, click Locate and install driver software (recommended), then click Continue. Click I don't have the disc. Show me other options. Insert the driver CD, click Browse my computer for driver software (advanced). For 32-bit: Type D:\XP-Later\32-bit, then click Next. (Change D: to match your CD-ROM drive letter) For 64-bit: Type D:\XP-Later\64-bit, then click Next.
PAGE 6
To Verify Windows Installation 1. 2. Check in Device Manager to verify successful driver installation. For Windows 2000 / XP / Server 2003: Right click My Computer, click Manage, click Device Manager. For Windows Vista: Right click Computer, click Manage, click Continue, click Device Manager. For Windows Server 2008: Right click Computer, click Manage, double click Diagnostics, click Device Manager. Click on the + (plus sign) in front of Ports (COM & LPT), CyberSerial 16C950.... should be displayed.
PAGE 7
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a lifetime manufacturer warranty with this product. Please see our web site for more warranty details.
PAGE 8
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCIe, PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades. SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty.