Installation guide

1. Boot up your system.

2. Connect the 4-pin connector of the provided FireWire (1394a)

6-pin/4-pin DV cable into your digital camcorder, and

connect the 6-pin connector into an available port on the 1394

adapter. Power on the camcorder. The camcorder should

now appear in Device Manager.

To verify successful DV Camcorder setup:

1. Check Device Manager to verify successful driver installation.

Windows 98SE/ME: From the main desktop, right click My

Computer, then click Properties. Click Device Manager tab.

Windows 2000/XP: Right click My Computer, click Manage,

then click Device Manager.

2. Double click Imaging Device(s).

- A Microsoft DV Camera and VCR or DV Camcorder should

be displayed.