Installation guide

5
9. Click Continue Anyway. Our driver has been thoroughly tested
in Windows for stability. This message appears because Microsoft
has not tested this product through WHQL certification.
10. Click Finish. Restart Windows to complete the installation.
Verify Proper Installation in Windows
1. Check Device Manager to verify successful installation.
Windows 98SE/ME: From the main desktop, right click My
Computer, then click Properties. Click Device Manager tab.
Windows 2000/XP: Right click My Computer, then click
Manage. Click Device Manager.
2. Double click 1394 Bus Controller or IEEE 1394 Bus host
controllers.
- OHCI IEEE 1394b Host Controller should be displayed.
Ulead VideoStudio Software Installation
The FireWire 800 DV Kit includes Ulead
®
VideoStudio
TM
digital
video editing software for producing home videos, complete with
attractive titles, transitions and sounds. Before installing
VideoStudio, make sure your adapter and DV camcorder are
properly installed and configured. See next section, Connecting
DV Camcorder, for more details on how to properly install your
DV camcorder.
1. Insert the Ulead VideoStudio DV software CD. Auto-run
should start automatically. If not, click Start, Run, type in
X:\Autorun.exe, then click OK. (Replace X: with the drive
letter of your CD-ROM)
2. Choose Install Ulead VideoStudio and follow on-screen
instructions to complete installation.
Note: For instructions on how to use Ulead VideoStudio,
please refer to VStudio.pdf file located in the Manual
directory on the Ulead VideoStudio DV software CD.
Connecting DV Camcorder
Before setting up the digital video camcorder, make sure to verify
the driver for the adapter has been successfully installed in your
system and follow the setup procedures listed below.