Installation guide

4
For Windows 2000
Windows 2000 automatically installs it's built-in 1394a driver for the
FireWire 800 32-bit PCI. To get the full potential out of the FireWire
800 32-bit PCI, install the Firewire 800 driver using the directions
below.
1. Right click My Computer, click Manage, then click Device
Manager.
2. Double click IEEE 1394 Bus host controller, then double click
Texas Instruments OHCI Compliant IEEE 1394 Host
Controller.
3. Click the Driver tab, then Update driver button.
4. At the Upgrade Device Driver Wizard window, click Next.
5. Select Search for a suitable driver for my device, then click
Next.
6. Insert the driver CD, check CD-ROM drives, then click Next.
7. Click Next.
8. Click Finish. Restart Windows to complete the installation.
For Windows XP
Windows XP automatically installs it's built-in 1394a driver for the
FireWire 800 32-bit PCI. To get the full potential out of the FireWire
800 32-bit PCI, install the Firewire 800 driver using the directions
below.
1. Right click My Computer, click Manage, then click Device
Manager.
2. Double click IEEE 1394 Bus host controller, then double click
Texas Instruments OHCI Compliant IEEE 1394 Host
Controller.
3. Click the Driver tab, then Update Driver button.
4. Select Install from a list or specific location, then click Next.
5. Select Don't search. I will choose the driver to install, then
click Next.
6. Insert the driver CD, click Have disk.
7. Type in D:, then click OK. (Change D: to match your CD-
ROM drive letter)
8. Select OHCI IEEE 1394b Host Controller, then click Next.