Installation guide

12
Connecting DV Camcorder
Before setting up the digital video camcorder,
make sure to verify the driver for the adapter has
been successfully installed in your system and
follow the setup procedures listed below.
1. Boot up your system.
2. Connect the 4-pin connector of the provided
FireWire(1394) 6-pin/4-pin DV cable to
your digital camcorder, and connect the 6-
pin connector to an available port on the
1394 adapter. Power on the camcorder.
The camcorder should now appear in
Device Manager.
To Verify DV Camcorder Setup
1. Right click My Computer, click Manage,
then click Device Manager.
2. Double click Imaging Device(s).
3. Microsoft DV Camera and VCR or DV
Camcorder should be displayed.