Installation guide

11
3. Click the 1394 adapter that you want to
switch, then click on Microsoft 1394
Drivers.
Note: If your system has multiple 1394
adapters installed, make sure that you
click on the 1394 adapter that the
camcorder will be plugged into.
4. Windows will display an information box
when the driver is ready for use. It may take
a few seconds for this box to appear. Wait
for this box to appear then connect your DV
camcorder.
Note: To switch back to the FireWire 800
driver, follow the same procedures, but in
step 3 instead of clicking on Microsoft
1394 Drivers, click on Unibrain 1394
Drivers.