User`s guide

Release 3.5 Release Notes
28
Avid Color Correction User’s Guide Changes
The following section documents changes to the Avid Color Correction
User’s Guide that occurred after the manual went to print.
Waveform and Vectorscope Commands
On page 86 of the Avid Color Correction User’s Guide, it currently states
that “the waveform and vectorscope commands, found in the Source menu,
configure the monitor to graphically display color information about your
sequence. The system displays the information for the currently active
monitor.”
This should be changed to read:
“The waveform and vectorscope commands, found in the Source menu,
configure the monitor to graphically display color information about your
sequence. The system displays the information for the image in the Current
monitor.”
The change means that the procedure for displaying a waveform monitor
or vectorscope should read:
To display a waveform monitor or vectorscope:
1. Choose Current from the Source menu of one of the monitors.
The monitor becomes the Current monitor.
2. Move the position indicator to the image for which you want the
information.
3. In one of the other monitors, click the Source menu and choose a
waveform or vectorscope command.
The monitor displays the selected waveform or vectorscope
information.
4. Move the position indicator to display information for other images.