User`s guide

9
The DV Driver Replaced dialog box appears, instructing you to
turn the DV device back on.
4. Turn the DV device on, and then click OK.
This establishes communication with the DV device via the
custom OHCI driver.
n
If Avid Xpress DV stops communicating with the camera or deck, try turning
the DV device off and then on.
Linking DV Devices to a Particular Driver
You can use the DVSelect utility to link to a driver other than the
custom OHCI driver. For example, you might need to use the
Microsoft driver with a third-party application.
To link to a driver other than the custom OHCI driver:
1. Connect and turn on any DV device.
2. Click Start>Programs>Avid>Utilities, and select DVSelect.
The DV Driver Select dialog box appears.
3. Select one of the following:
- Microsoft DV Camera and VCR Driver
- Avid/Texas Instruments 1394 DV Camcorder Driver
4. Select “Switch drivers for only those devices that are currently
turned on.”
If you do not select this option, the driver is linked to all devices
you have ever connected to the system.
5. Connect and turn on any DV devices you want to link to the
selected driver.
6. Click OK.
The selected driver is linked to the currently connected devices
that are turned on.