User`s guide

40
➤
If you autosync two clips by IN point (one video clip and one audio
clip), but no IN point has been set, the video and audio sync will be
off by one frame.
Workaround: Go to the head of the clip and set an IN point.
➤
Line levels record very loud when the default of +20 dB Gain is
used.
Workaround: Select the +20 dB Gain check box in the Audio tool,
above the Input slider.
Third-Party Applications
➤
Importing a QDesign Music 2 file, formatted as a QuickTime movie,
plays back with stuttering audio at the end of the sequence.
➤
Exporting to a QuickTime 5.0 file with the pan set to the extreme left
or right splits over both channels. This is apparent only on a Dell
®
Precision Workstation 330.
Workaround: Disable the Stereo Wide feature.
To disable the Stereo Wide feature:
1. Click the Desktop.
2. Double-click the Speaker icon located in the bottom right corner of
the Desktop.
The Play Control Panel dialog box appears.
3. Click Options, and then choose Properties from the menu.
4. Make sure the Playback option is selected.
5. Click the Stereo Wide option to select it.
6. Click OK.
7. Close the Play Control Panel dialog box.