User`s guide

34
Additional Notes on Operation
n
For specific issues with cameras, check the Knowledge Center.
Audio
➤
When using the Yamaha
®
SXG driver, you might experience audio
hardware underruns when playing back audio.
Workaround: Quit Avid Xpress DV and set the preferred playback
device to Sound Max Digital Audio.
1. Click the Start button, point to Settings, and then select Control
Panel.
2. Double-click Sounds and Multimedia.
The Sounds and Multimedia Properties dialog box appears.
3. Click the Audio tab.
4. In the Sound Playback section, choose Sound Max Digital Audio
from the Preferred device pop-up menu.
5. Select “Use only preferred devices.”
6. Click OK.
➤
When playing a calibration tone to both the camera and the
consumer audio line (DV OHCI/1394) out, the frequency of the tone
heard on the consumer line will change.
Workaround: If calibrating the audio going to the DV OHCI/1394 line,
listen to the output through the camera, rather than the consumer
audio line out. Disable the output to the camera. Double-click the
Video Display settings from the Project Settings window, and then
click the Client monitor option to deselect it.