User`s guide

19
Audigy driver installation. Use the following instructions to install
your Sound Blaster Audigy card.
Installing the Sound Blaster Audigy Card in an Avid Xpress DV System
To install the Audigy card:
1. Shut down your system.
2. Install the Sound Blaster Audigy card into an open PCI slot.
3. Start your system.
4. Log in.
The Hardware Wizard should have found the new hardware.
5. Insert the Sound Blaster Audigy Installer CD-ROM that came with
the Audigy card but do not run the installer application.
6. Use the Hardware Wizard to browse the Installer CD-ROM for an
appropriate audio device driver.
7. Use the Hardware Wizard to install the audio device driver found
on the Installer CD-ROM.
8. Restart the system when prompted.
9. Log in.
The Hardware Wizard might run again, trying to install a driver
for the game port.
10. Use the Hardware Wizard to search the Installer CD-ROM for an
appropriate game port driver.
11. Use the Hardware Wizard to install the game port driver that is
found on the Installer CD-ROM.
n
The installer that comes with the Audigy card includes many applications
and installers. Some of these applications will not run with the driver
installation described above. Install these at your own risk. The specific
applications that might have a conflict are Creative TaskBar and EAX Audio
Effect Controls.