User`s guide

11
To set the paging file:
1. Click the Start button, point to Settings, and then select Control
Panel.
2. Double-click System.
3. Click the Advanced tab in the System Properties dialog box.
4. Click Performance Options.
5. In the Virtual Memory section, click Change.
6. Select the appropriate drive.
7. Set Initial size and Maximum size to 384 MB.
8. Click OK.
FireWire Support
At this time, Avid supports the use of only one FireWire
®
port at a
time. You can have only a single DV device connected to the
Avid Xpress DV system at one time. For example, if you have a camera
connected to your system and want to use a video deck, you will have
to disconnect your camera and then connect the video deck.
This limitation does not pertain to FireWire drives.
Screen Resolution
Avid requires the following for your system to run the Avid Xpress DV
application:
• The Screen area (in the Display Properties dialog box) set to a
minimum of 1024 by 768 pixels
• The Colors (in the Display Properties dialog box) set to True Color
32 bit (High Color 16 bit for systems with video cards that don’t
have 32 MB of memory)