Installation guide

9
Windows Vista
Windows Vista will automatically detect and install
most FireWire devices when connected. However, for
devices that do not install automatically, follow the steps
below to complete the installation.
1. Click Locate and install driver software.
2. Click Continue to complete the installation.
Mac OS
Mac OS will automatically detect and install most FireWire
devices when connected. If additional drivers are
required, refer to the device's users manual.
Removing the ExpressCard
Stop the ExpressCard before removing it from the
ExpressCard slot.
Windows
The utility is located by the system clock.
1 Click the Unplug or Eject Hardware or Safely
Remove Hardware icon. Click Remove PCI
standard PCI-to-PCI bridge.
2. Wait for the confirmation box, then remove the
ExpressCard from the ExpressCard slot.
Mac OS
The utility is located by the system clock.
1. Click the monitor icon, then choose Power Off
Card.
2. You can now remove the ExpressCard from the
ExpressCard slot.