Installation guide

5. To install the card, carefully align the card's bus

connector with the selected PCI slot on the

motherboard. Push the board down firmly, but

gently, until it is well seated.

6. Replace the slot bracket holding screw to secure

the card.

7. Connect one end of the audio cable from your

CD-ROM or DVD-player to the CD In on the

soundcard, then replace the computer cover and

reconnect the power cord.

Driver Installation

Follow the instructions below to install the DP

SoundWave 4 Channel PCI drivers.

Windows 8 (32-/64-bit)

1. Install the board then boot up Windows.

2. At the Windows desktop, insert the Software CD.

3. Click Windows key and R, type D:\setup.exe,

click OK. (Change D: to match your CD-ROM

drive letter)

4. Follow the on-screen instructions to complete the

installation.

Windows 7 (32-/64-bit) / Server 2008 R2

1. Install the board then boot up Windows.

2. At the Windows desktop, insert the Software CD.

Close the CD autoplay box if prompted.

3. Click Start, in the Search programs and files box,

type D:\setup.exe, press Enter. (Change D: to

match your CD-ROM drive letter)

4. Follow the on-screen instructions to complete the

installation.