Installation guide

Driver Installation

Windows 8 / 7 / Vista / XP / Server 2003 & 2008 / Server

2008 R2 / 2000 automatically installs it's built-in FireWire

400 driver for the DP FireWire 800 PCIe. To get the full

speed out of this controller, install the FireWire 800

driver using the directions below.

Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Server

2008 R2

1. Install the board and boot up Windows.

2. Insert the driver CD. Close the CD autoplay window

if prompted.

3. Click Windows key and R.

For 32-bit: Type D:\setup32.exe, press Enter. (Change

D: to match your CD-ROM drive letter)

For 64-bit / 2008 R2: Type D:\setup64.exe, press

Enter. (Change D: to match your CD-ROM drive

letter)

4. Follow the on screen instructions to complete the

installation.

Windows Vista (32-/64-bit) / Server 2008 (32-/64-

bit)

1. Install the board and boot up Windows.

2. Insert the driver CD. Close the CD autoplay window

if prompted.

3. Click Start. In the Start Search box,

For 32-bit: Type D:\setup32.exe, press Enter. (Change

D: to match your CD-ROM drive letter)

For 64-bit: Type D:\setup64.exe, press Enter. (Change

D: to match your CD-ROM drive letter)

4. Follow the on screen instructions to complete the

installation.