Installation guide

2
FireWire 800
Ports
Power Connector
Package Contents
DP FireWire 800 PCIe
Spare enhanced low profile bracket
"Y" split power cable & driver CD
Quick installation guide
Board Layout
Figure 1: Layout
Note: The Power Connector (same as the one used
with your floppy disk drive) is designed to provide
additional power to the board when needed. This
connection is recommended. We recommend to
connect this power connector when the following
conditions occur:
- All ports are used.
- Device(s) not being detected.
In case you need to connect this power connector,
power off your system first before making this
connection.