Installation guide

6
Windows Vista
Windows Vista automatically installs it's built-in FireWire
400 driver for the FireWire 800 3-Port PCIe. To get the full
speed out of this controller, install the Firewire 800 driver
using the directions below.
1. Insert the driver CD. Click Start, Run. Type
D:\setup.exe, click OK. (Change D: to match the
drive letter of your CD-ROM)
2. Click Allow.
3. At the Welcome screen, click Next.
4. At the License Agreement screen, click Yes.
5. Type in your customer information, then click Next.
6. At the Destination Location screen, click Next.
7. Select Complete, then click Next.
8. At the Program Folder screen, click Next.
9. At the Windows Security box, click Install this
driver software anyway four times, then click Finish.
10. Select the restart Windows option, then click Finish.
Verify Windows Installation
1. Right click My Computer, click Manage, then click
Device Manager.
2. Double click 1394 Bus host controllers. IEEE 1394b
(FireWire 800) adapter should be displayed.
Mac OS
Mac OS will automatically detect and install the correct
driver for the FireWire 800 3-port PCIe. No additional
driver is necessary.