Installation guide

7
Mac OS X v10.4 or later
Mac OS will automatically detect and install the correct
driver for the DP FireWire 800 3-Port PCIe. No additional
driver is necessary.
To Verify Mac OS Installation
Check System Profiler to verify installation.
1. Click Go, then Utilities.
2. Double click System Profiler.
3. Click FireWire and another FireWire Bus should be
displayed.
Connecting Devices
General driver installation steps are provided below.
Please review your device's user manual for more details.
Windows 8 / 7 / Vista / Server 2008 & 2008 R2
Windows 8, 7, Vista, Server 2008 or 2008 R2 will
automatically detect and install most FireWire devices
when connected. However, for devices that do not install
automatically, additional drivers maybe required. Refer
to the device's users manual and/or contact the device's
manufacturer for the correct driver.
Windows XP
1. At the Found New Hardware Wizard.
For XP w/SP2 or later: Select No, not this time, then
click Next.
For XP w/SP1 or earlier: Go directly to step #2.
2. Select Install the Software Automatically, click Next.
3. Click Continue Anyway. (Skip if not prompted)
4. Click Finish to complete the installation.