Installation guide

Windows Server 2008 (32-/64-bit)

1. Insert the driver CD. Click Start.

For 32-bit: In the Start Search box, type

D:\setup32.exe, press Enter. (Change D: to match

your CD-ROM drive letter)

For 64-bit: In the Start Search box, type

D:\setup64.exe, press Enter. (Change D: to match

your CD-ROM drive letter)

2. Follow the on screen instructions to complete the

installation

Windows 2000

1. Insert the driver CD. Click Start, Run. Type

D:\setup32.exe, click OK. (Change D: to match

your CD-ROM drive letter)

2. Follow the on screen instructions to complete the

installation.

To Verify Windows Installation

1. Check Device Manger to verify installation.

For Windows 8 / 7 / XP / Server 2003 & 2008 R2 / 2000:

Right click Computer or My Computer, click

Manage, then click Device Manager.

For Windows Vista: Right click Computer, click

Manage, click Continue, click Device Manager.

For Windows Server 2008: Right click Computer,

click Manage, double click Diagnostics, click

Device Manager

2. Double click 1394 Bus host controllers. Unibrain

driver/OHCI Compatible Board or IEEE 1394b

(FireWire 800) adapter should be displayed.