Installation guide

7
For Windows Server 2008 / 2008 R2: Right click
Computer, click Manage, click Diagnostics, click
Device Manager.
2. Double click 1394 Bus host controllers. Unibrain
driver/OHCI Compatible Board or IEEE 1394b
(FireWire 800) adapter should be displayed.
Connecting Devices
General driver installation steps are provided below.
Please review your device's user manual for more details.
Windows 8 / 7 / Vista / Server 2008 / 2008 R2
These Windows OSes will automatically detect and install
most FireWire devices when connected. However, for
devices that do not install automatically, additional drivers
maybe required. Refer to the device's users manual and/
or contact the device's manufacturer for the correct driver.
Windows XP
1. At the Found New Hardware Wizard.
For XP w/SP2 or later: Select No, not this time, then
click Next.
For XP w/SP1 or earlier: Go directly to step #2.
2. Select Install the Software Automatically, click
Next.
3. Click Continue Anyway. (Skip if not prompted)
4. Click Finish to complete the installation.