Installation guide

4
Driver Installation
This section provides information on how to install the DP
FireWire 800 PCI-32T drivers.
Windows 8 (32-/64-bit)
Windows 8 automatically installs it's built-in FireWire 400
driver for the DP FireWire 800 PCI-32T. To get the full speed
out of this controller, install the FireWire 800 driver using
the directions below.
1. Insert the driver CD.
2. Tap the notice box on the upper right corner, click
Open folder to view files.
For 32-bit: Choose setup32.exe file.
For 64-bit: Choose setup64.exe file.
3. Follow the on screen instructions to complete the
installation.
Windows 7 (32-/64-bit) / Server 2008 R2
These two OSes can automatically installs it's built-in
FireWire 400 driver for the DP FireWire 800 PCI-32T. For
Windows server 2008 R2, please refer
For 64-bit portion.
To get the full speed out of this controller, install the
FireWire 800 driver using the directions below.
1. Insert the driver CD. Click Start.
For 32-bit: In the Search programs and files box,
type D:\setup32.exe, press Enter. (Change D: to
match your CD-ROM drive letter)