Installation guide

3
Figure 2: Rear Layout
Stereo Audio In
Mini USB port
HDMI Output
Power Jack
VGA Input
• Push Buttons (from left to right): Down,
Up, Menu/Enter. See page 5 for more details.
• Power Jack: Plug in the power adapter here
• Mini USB port: Connects to a USB port of a
computer to control the Scaler via software.
• Stereo Audio In: Connects to an analog
stereo audio source
• HDMI Output: Connects to an HDMI
display
• VGA Input: Connects to a VGA source
Hardware Installation
1. Power off all devices, including the source
device and display.
2. Connect the PC's VGA output to the Scaler's
VGA Input.