Installation guide

2
Package Contents
• VGA & Audio to HDMI Converter Scaler
• Screw Kit and 4 rubber pads
• Power adapter (5V/2A)
• IR remote control
• Software CD and Installation guide
Layout
S/PDIF Audio In
DIP Switch
LED Indicator
Push Buttons
IR Sensor
Figure 1: Front Layout
• S/PDIF Audio In: Connect to a digital RCA
S/PDIF audio source
• DIP Switch: F/W ( ) for firmware update;
NORMAL ( ) for normal operation
• LED Indicator: The upper LED lights up
when powered on; the lower LED lights up
when signal is detected
• IR sensor: Receives the IR commands from
the included IR remote control