Installation guide

4
4. Connect the S/PDIF audio speaker to the
Scaler's S/PDIF Audio Out, if needed.
5. Connect an HDMI cable (cable not included)
to your HDMI source, then connect the
other end to the Scaler's HDMI Input.
6. Plug the included power adapter into the
Scaler's Power Jack, then plug it into a
reliable power outlet.
7. Power on all audio/video units connected
to the Scaler. The Scaler is ready to use.
Application
HDMI cable
VGA cable
S/PDIF
cable
3.5mm audio
cable
HDMI source (computer,
TV, DVD player, etc)
Speakers (S/PDIF (RCA)
or 3.5mm stereo)
Figure 3: Application
VGA display