Installation guide

3
Figure 2: Rear Layout
Stereo Audio OutMini USB port
HDMI Input
Power Jack
VGA Output
S/PDIF Audio Out
• Power Jack: Plug in the power adapter here
• Mini USB port: Connects to a USB port of a
computer to control the Scaler via software.
• Stereo Audio Out: Connects to analog stereo
audio speakers
• S/PDIF Audio Out: Connects to digital
S/PDIF speakers via RCA connector
• VGA Output: Connects to a VGA display
• HDMI IN: Connects to an HDMI source
Hardware Installation
1. Power off all devices, including the source
device and display.
2. Connect the monitor's VGA input to the
Scaler's VGA Output.
3. Connect the stereo audio speaker to the
Scaler's Stereo Audio Out, if needed.