Installation guide

4
2. At the Found New Hardware window, insert the
driver CD, click Locate and install driver software
(recommended), then click Continue.
3. Click Don't search online. Click Next.
4. Click Close to complete the installation.
Windows XP (32-bit ) / Server 2003 (32-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, insert the
driver CD.
For XP w/SP1 or earlier / Server 2003: go to step #2.
For XP w/SP2 or later / Server 2003 w/SP1 or later:
select No, not this time, click Next.
3. Select Install the software automatically
(Recommended, then click Next.
4. Click Finish to complete the installation.
Windows XP (64-bit) / Server 2003 (64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, insert the
driver CD.
For XP: go to step #2.
For XP w/SP1 or later / Server 2003: select No, not this
time, click Next.
3. Select Install the software automatically
(Recommended, then click Next.
4. Click Continue Anyway, then click Finish to
complete the installation.
Windows Server 2008 (32-bit)
1. Install the board and boot up Windows.