Installation guide

ManualsBrandsSIIG Manualscomputer componentsCyberParallel PCI-E

CyberParallel PCIe

Quick Installation Guide

04-0422C

Introducing the CyberParallel PCIe

The CyberParallel PCIe high-speed parallel adapter

provides one additional parallel port to your PCI Express

enabled system.

Features and Benefits

• Compliant with PCI Express Base Specification

Revision 1.0a

• PCI Express 1-lane (x1) parallel adapter works with

PCI Express slots with different lane width

• Full support for Windows-based software

• Supports EPP/ECP and SPP (standard) parallel

port modes

System Requirements

• PCI Express enabled system with an available PCI

Express slot

• Windows

7 (32-/64-bit) / Vista (32-/64-bit) / XP

(32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000

Package Contents

• CyberParallel PCIe adapter

• Spare enhanced low-profile bracket

• Driver CD

• Quick installation guide

Summary of content (8 pages)

PAGE 1
CyberParallel PCIe Quick Installation Guide Introducing the CyberParallel PCIe The CyberParallel PCIe high-speed parallel adapter provides one additional parallel port to your PCI Express enabled system. Features and Benefits • • • • Compliant with PCI Express Base Specification Revision 1.
PAGE 2
Layout Parallel Port Figure 1. Layout Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer’s case for a few seconds.
PAGE 3
4. 5. 6. To install the card, carefully align the card's bus connector with the selected PCI Express slot on the motherboard. Push the board down firmly, but gently, until it is well seated. Replace the slot bracket's holding screw to secure the card. Replace the computer cover and reconnect the power cord. Driver Installation This section provides information on how to install the CyberParallel PCIe drivers. Windows 7 (32-/64-bit) 1. Install the board and boot up Windows.
PAGE 4
2. 3. 4. At the Found New Hardware window, insert the driver CD, click Locate and install driver software (recommended), then click Continue. Click Don't search online. Click Next. Click Close to complete the installation. Windows XP (32-bit ) / Server 2003 (32-bit) 1. 2. 3. 4. Install the board and boot up Windows. At the Found New Hardware Wizard, insert the driver CD. For XP w/SP1 or earlier / Server 2003: go to step #2.
PAGE 5
2. 3. 4. 5. 6. 7. 8. At the Found New Hardware window, click Locate and install driver software (recommended). Insert the driver CD. Click Don't search online. Click I don't have the disc. Show me other options. Click Browse my computer for driver software (advanced). Type D:, then click Next. (Change D: to match your CD/DVD-ROM drive letter) Click Close to complete the installation. Windows Server 2008 (64-bit) 1. 2. 3. 4. 5. 6. 7. Install the board and boot up Windows.
PAGE 6
5. Click Next, then click Finish to complete the installation. To Verify Windows Installation 1. 2. Check in Device Manager to verify installation. For Windows 7: Right click Computer, click Manage, then click Device Manager. For Windows Vista: Right click Computer, click Manage, click Continue, then click Device Manager. For Windows XP / Server 2003 / 2000: Right click My Computer, click Manage, click Device Manager.
PAGE 7
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a lifetime manufacturer warranty with this product. Please see our web site for more warranty details.
PAGE 8
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.