Installation guide

8
For Windows NT 4.0:
1. Click Start, Settings, Control Panel.
2. Double click NetMos Multi-I/O Ports icon, click
Parallel Port tab, two parallel ports should be listed
under Ports.
For Windows 2000/XP/Server 2003:
1. Right click My Computer, click Manage, then click
Device Manger.
2. Double click Multifunction adapters, NetMos 9835
PCI... Controller should be listed.
3. Double click Ports (COM & LPT), two NetMos PCI
Parallel Ports should be listed.
Troubleshooting
Problem: I am installing a parallel port(s) and my system
freezes up when Windows tries to install the driver for
my printer port.
Solution: Enter your system bios, set the onboard parallel
port I/O address to 278h, save and exit. In certain
systems, the address 278h is reserved for ISA boards. So
when the PCI parallel port tries to capture this address,
your system gets confused and freezes up.